标准查询
共找到 标准查询结果由华人螺丝网友情提供
-
- GB 国标
- GB/T 31.3-88 六角头螺杆带孔螺栓 细牙 A和B级
-
(UDC 621.882.6 | 代替 GB31、23、24-76)
Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B
-
- GB 国标
- GB/T 31.2-88 六角头螺杆带孔螺栓 细杆 B级
-
(UDC 621.882.6 | 代替 GB31、23、24-76)
Hexagon bolts with split pin hole on shank-Reduced shank-product grade B
-
- GB 国标
- GB/T 37-88 T 形槽用螺栓
-
(UDC 621.882.6 | 代替 GB37-76)
Bolts for T-Slot
-
- GB 国标
- GB/T 29.1-88 六角头头部带槽螺栓 A 和 B 级
-
(UDC 621.882.6 | 代替 GB29-76)
Hexagon bolts with slot on head -product A and B
-
- GB 国标
- GB/T 15-88 大半圆头带榫螺栓
-
(UDC 621.882.6 | 代替 GB15-76)
Cup head nib bolts with large head
-
- GB 国标
- GB/T 6191-86 内六角花形圆柱头螺钉-8.8和10.9级
-
(UDC 621.882.2 | 代替 GB2671-81)
Hexagon lobular socket head cap screws-property class 8.8 and 10.9
-
- DIN 德标
- DIN EN ISO 2010 开槽半沉头螺钉（通用头型）－产品等级A级
-
(ISO 2010:1994 | DIN EN ISO 2010 | 代替 DIN 964)
Countersunk slotted raised head screws(common head style)-Produce grade A
-
- DIN 德标
- DIN 7516 十字槽螺纹滚成自攻螺钉—尺寸、技术要求及试验
-
(DIN 7516 | )
Cross recessed head thread cutting screws - Dimensions,requirements and testing
-
- DIN 德标
- DIN 7500-2 米制螺纹滚成自攻螺钉—预制孔直径尺寸方案
-
(DIN 7500-2 | )
Tread rolling screws for ISO metric thread - Guideline values for hole diameters
-
- DIN 德标
- DIN 267-30 紧固件供货技术条件—米制螺纹—性能等级为10.9级的螺纹滚成自攻螺钉
-
(DIN 267-30 | )
Technical delivery conditions for fasteners - Metric thread rolling screws of property class 10.9
共找到 标准查询结果由华人螺丝网友情提供--合作联系：110@luosi.com